NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
ReadyNas Ultra 2 - OS 6.10.7 - Only accesible via DLNA / UPNP
Hi there, I am running a ReadyNas Ultra 2, on the latest OS (6.10.7) and the device has a reserved IP address. As of yesterday, I was able to access the NAS via Windows Explorer / Mac Finder ...
It would have been best to complete the backup before manipulating disks. You knew the data was at risk.
What status is RAIDar giving you for the NAS? https://kb.netgear.com/20684/ReadyNAS-Downloads#raidar
I had removed one of the disks to run it through R-Studio - this software has found the data, but there are over 50,000 files, which are spread across a many folders and sub-folders. I had hope the data would match the Folder structure on the NAS itself.
RAIDar status is - "System Starting Up"
BigReyRey90 wrote:
I had removed one of the disks to run it through R-Studio - this software has found the data, but there are over 50,000 files, which are spread across a many folders and sub-folders. I had hope the data would match the Folder structure on the NAS itself.
RAIDar status is - "System Starting Up"
R-Studio doesn't claim support for BTRFS, so it is rather odd that it is seeing any of your files.
You might reach out to the R-Studio folks via https://forum.r-tt.com/ I believe it is supposed to preserve the folder structure, but there are cases in their forum where that doesn't seem to work.
We could try tech support mode - that is a bit more complicated to get into, and the USB disks likely won't mount automatically. Instructions to boot into that mode are on pages 14-15 here: https://www.downloads.netgear.com/files/GDC/RNDU2000/ReadyNAS_Ultra_UltraPlus_NVX_Pro_HW_en_8July11.pdf
If it boots into that mode successfully, then you will need more guidance on how to log in, and mount the data volume.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
