NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
thebuchans
Oct 02, 2025Aspirant
Readynas ultra 6 won't go past readynas screen
Ho all, after many years I've decided to tackle my readymas issue. I had an issue with it 3 years back and paid a tech to look at it, he said 2 drives had collapsed and replaced them. It worked again...
Sandshark
Oct 03, 2025Sensei - Experienced User
That's not a typical failure mode for bad drives. It is a typical failure mode for a weak power supply. As StephenB suggests, lets see what the drive testing shows before going any further. But I'm thinking your previous problem may have been mis-diagnosed and this is really still the same issue.
When you had it repaired before, was your data still intact when you got it back? If so, then you either didn't have two failed drives (though you could have had one failed and on on the verge) or your volume is RAID6. Do you have an old saved log .zip file that can show your volume configuration?
Related Content
NETGEAR Academy

Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!