NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
remotely shutdown - Nas314 is not business ready
Readynas 314 Firmware 6.5.0 (Server 200r2) I find it hard to believe that there is not an easy way to remotely shutdown a Readynas 314. I have a ups powering both the NAS and a server. The UPS sh...
IT-Dept wrote:
I would hope the nas does not shut down if the communication drops.
It shouldn't (and doesn't on my ReadyNAS). It's fairly easy to test - power both the NAS and the PC directly from the main power, and put a different load on the UPS. Then disconnect the UPS from the main power, and see if the NAS and server both shut down. You can play with the connections while it is draining.
Of course if you are using the network, you need to make sure that any switches between the NAS and UPS are also protected (ideally with the same UPS, or at least one that you think has longer run time han the NAS UPS).
Ok thanks for that
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
