NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
RN202 Device Communication Error
Hi, Just bought a new RN202 for my home. I connected the power and the Ethernet cable to the wifi router, as per instructions, and I accessed https://readycloud.netgear.com/. It appeared that ...
Try installing RAIDar then to check if the NAS is showing up on the network. If it does not detect the NAS, connect the NAS straight to the computer where you have the RAIDar installed. It should show the status of the NAS and it's current IP address. You will have to put a static IP address on the computer that is with the same subnet of the NAS'
Another way is open a browser then type https://nas-xx-xx-xx in the address bar
where last x is last 6 digits of MAC address of the NAS.
If you are still having trouble doing this, it is best you contact support.
Another way is open a browser then type https://nas-xx-xx-xx in the address bar
where last x is last 6 digits of MAC address of the NAS.
If you are still having trouble doing this, it is best you contact support.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
