I just uninstalled transmission app and now I can't get into the interface. I'm getting 'Err_connection_refused' in chrome. Help!

Progress! I rebooted and got into readyNAS (yay!). But I still can't access the shares in windows anymore. :( I have these messages in my logs Fri Apr 22 2016 11:58:33 Disk: Detected high command timeouts: [60] on disk 2 (Internal) [ST6000DM001-1XY17Z, Z4D2QXDG]. This condition often indicates an impending failure. Be prepared to replace this disk to maintain data redundancy.Fri Apr 22 2016 11:57:07 System: ReadyNASOS background service started.Fri Apr 22 2016 11:56:52 Volume: System volume root's usage is 100%. This condition should not occur in normal conditions. Contact technical support.

Of course both are concerning, but the full root volume is why you can't access the NAS. Do you have ssh enabled? Did you install transmission manually, or did you use super_poussin's app?

I installed transmission via the UI (Apps -> Available apps). BTW, its still showing transmission under my installed apps. I had clicked 'remove' before this whole thing started, so I guess it didn't uninstall.In system--services, SSH is NOT enabled. Hope that helps

The OS partition needs to be cleaned out. Options are (a) contact support, and have them do it remotely. Alternatively, someone from Netgear who posts here might reach out to you and offer. (b) Enable ssh, and troubleshoot it yourself. (c) delete all logs (system and backup) from the admin ui, and see if that helps. (d) do a factory reset, and restore all the data. If you aren't familiar with linux commands, then you probably shouldn't attempt (b). The risk with (c) is that it might not address the real root cause. You should probably also power down the NAS and test disk 2 in a PC with Seatools.

RN202 Web Interface not starting!

14 Replies

Replies have been turned off for this discussion

JennC

NETGEAR Employee Retired

Apr 21, 2016

Hello ayodeji13,

Can you still get to the shares of the NAS? Have you tried rebooting the NAS?

Welcome to the community!

Regards,

ayodeji13

Aspirant

Apr 22, 2016

Progress!

I rebooted and got into readyNAS (yay!). But I still can't access the shares in windows anymore. :(

I have these messages in my logs

Fri Apr 22 2016 11:58:33		Disk: Detected high command timeouts: [60] on disk 2 (Internal) [ST6000DM001-1XY17Z, Z4D2QXDG]. This condition often indicates an impending failure. Be prepared to replace this disk to maintain data redundancy.
Fri Apr 22 2016 11:57:07		System: ReadyNASOS background service started.
Fri Apr 22 2016 11:56:52		Volume: System volume root's usage is 100%. This condition should not occur in normal conditions. Contact technical support.

StephenB
Guru - Experienced User
Apr 22, 2016
Of course both are concerning, but the full root volume is why you can't access the NAS.

Do you have ssh enabled? Did you install transmission manually, or did you use super_poussin's app?

Forum Discussion

RN202 Web Interface not starting!

14 Replies

Related Content

Getting Started - Registration

RN202 - Time Servers

R6250 browser interface

RND2120 to RN202 upgrade

Frequency start Value

NETGEAR Academy

ProSupport for Business