NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Rsynch backup from RN214 to RN104. Cannot connect
I am running RN214 and RN104 both with the current FW (6.9.1). Upon setting up the Rsynch backup between the two, the backup job cannot connect to the backup (RN104) system. Although when I use the...
Here is an example of the log for a failed attempt:
Backup Job Name: Test
Backup Job Type: Full
Protocol: rsync
Backup Source: [Test]/
Backup Destination: [remote:rsync]/192.168.1.68::Test
Backup Start Time: Mon Jan 15 2018 17:19:09
Backup Finish Time: Mon Jan 15 2018 17:19:09
Backup Status: Fail: Failure during copy.
Failed to run rsync, return rc 10
'rsync' command returns rc=10
rsync: failed to connect to 192.168.1.68 (192.168.1.68): Connection refused (111)
rsync error: error in socket IO (code 10) at clientserver.c(125) [sender=3.1.2]Changed port to 873 and that fixed it.
Thanks!
Use 873 for the port. Also, if you are using the hostname of the remote system, then try using it's IP address.
Here is an example of the log for a failed attempt:
Backup Job Name: Test
Backup Job Type: Full
Protocol: rsync
Backup Source: [Test]/
Backup Destination: [remote:rsync]/192.168.1.68::Test
Backup Start Time: Mon Jan 15 2018 17:19:09
Backup Finish Time: Mon Jan 15 2018 17:19:09
Backup Status: Fail: Failure during copy.
Failed to run rsync, return rc 10
'rsync' command returns rc=10
rsync: failed to connect to 192.168.1.68 (192.168.1.68): Connection refused (111)
rsync error: error in socket IO (code 10) at clientserver.c(125) [sender=3.1.2]
Changed port to 873 and that fixed it.
Thanks!
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
