NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Shares now Read Only after Updating to 6.7.1
I have an RN526X as my primary server and use a RN314 as a backup server. Yesterday, I upgraded both systems to OS 6.7.1 Each night at 10:00, the RN 526 sends an incremental backup to a folder o...
Thanks for your note. Please see my follow up post directly above yours.
I did do a factory reset of the NAS (twice) and now do have read/write access. That said, it looks like there is still an issue with the file system as it will not allow me to upload the access key for the ReadyDR function.
I have also tried another manual install of the 6.7.1 firmware but that did not change anything.
Other than that, it seems like the NAS is running correctly again.
A screen shot if the error is included above.
Thoughts?
I did do a factory reset of the NAS (twice) and now do have read/write access. That said, it looks like there is still an issue with the file system as it will not allow me to upload the access key for the ReadyDR function.
I have also tried another manual install of the 6.7.1 firmware but that did not change anything.
Other than that, it seems like the NAS is running correctly again.
A screen shot if the error is included above.
Thoughts?
Hello dschwartzer
can you please try to clean web cache or change a web browser then upload key again?I just tested key uploading on both 6.7.1 devices without issue.
Thanks for your reply. Clearing the browser in Chrome did not help but switching to the Safari (Mac) browser did allow mew to upload the Access Key.
That said, after uploading the key to the 413, I re-setup the ReadyDR shares on the 314 but all of the ReadyDR jobs failed. In checking the history there is sometimes a message that says Broken Pipe. Most of the times the ReadyDR jobs just say Running but never complete and nothing is written to the 314, and I have to cancel the jobs manually.
I know the 314 is on the network and visible to the 526 because a Backup job backing up the entire data volume to a Share on the 314 continues to run fine every night at 10:00 PM.
Any ideas what I am doing wrong?
Regards,
David
Broken Pipe should be related with network issue,can you please send latest system log again?
I am currently traveling until 5/22 but will submit the logs as soon as I return.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
