NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Simultaneous failure of multiple drives
Been using my ReadyNAS for several years now with no issues. 4x6TB, RAID10. Today I tried to access the volume, and it appeared as empty (no files), but it still showed that 75% of the volume was u...
chhreese wrote:
It said to remove disks 1, 2 and 4 so start using the volume.
What firmware were you running? There's no way that you can remove 3 disks from a 4 disk RAID-10 array and use the volume.
You should shut down the NAS. If you have a windows PC, you should remove the disks (labeling by slot) and then try testing them in the PC with vendor tools (Lifeguard for Western Digital, Seatools for Seagate). You can connect the disks either via SATA or with a USB dock/adapter. Windows won't recognize the format, but the vendor tools should still detect the drives.
chhreese wrote:
I'm more concerned with covering the data on the volume than getting the NAS up and running again.
Does this mean that you have no backup?
Thanks for the reply. I'm currently running 6.9.3.
Just an update to this. I powered it back on this morning, and it now shows all 4 discs in red, and the error message says "Remove inactive volumes to use the disk, Disk #1,2,3,4."
And no, I do not have a backup of this. I know there's no guarentee that an entire array won't fail, but that's why I ran a mirrored array, as this was my backup.
I think the next step is to test the drives in a windows PC as described above, and see if they are healthy. Look at the SMART stats after the tests, don't just depend on a "pass" in the diag.
Ok, so I ran the extended tests on all four drives and they all passed. So I'm assuming that means the drives are fine and it was the NAS that failed. What would you recommend for next steps?
And I checked on when I bought the NAS. It's three months out of warranty.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
