NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Slow RAID0 to RAID0 on 314s with bonded gigabit
Hi, I've just set up two 314s in a small business. Each has 3 new WD Red 6TB drives in it, set up in RAID0. Both have two new <3m CAT6 cables going into the gigabit switch, and are bonded with adap...
make sure the switch you have connected the nas's to supports etherchannel/lacp, configure the switch and nas to use a load balancing algorithm that is best for your destination...usually, if same source -> same destination, it will only go out one link...which means the max bandwidth will be about 80-85Mbps, and with a 316..75MBps would be rather close to that. If you have a managed switch, look at the port transfer stats to see if the traffic is being balanced evenly between the two links..I doubt it, I suspect that is your limiting factor here.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
