NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Swapped drives now Not-Redundant
My ReadyNAS NV+ v2 was full of 1TB disks and I've been replacing them over time with 3TB disks. The last swap out seemed to work fine except now the web interface shows X-RAID2 (Not-Redundant) which m...
Your enclosure.log says your volume is not redundant but it shows all disks as O.K.
Looking at mdstat.log it shows The 4x1TB RAID-5 layer (md2) as redundant but not the 2x1TB RAID-1 layer (md3).
For some reason /dev/sdb (probably the WD30EZRS in slot 2), the disk you most recently added is not synced in as part of the OS partition (on md0) properly. This may be the problem.
Would suggest you contact NetGear tech support for advice.
Looking at mdstat.log it shows The 4x1TB RAID-5 layer (md2) as redundant but not the 2x1TB RAID-1 layer (md3).
For some reason /dev/sdb (probably the WD30EZRS in slot 2), the disk you most recently added is not synced in as part of the OS partition (on md0) properly. This may be the problem.
Would suggest you contact NetGear tech support for advice.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
