Forum Discussion

Aspirant

Aug 24, 2015

Updated to 6.2.5. Started a rebalance, now nas dead

Hello, in the past I had several problems with my readynas 102: system was unstable expecially with nfs/array rebuild and so on. Now I installed os 6.2.5 and things seemed to work better. So I dec...

Aspirant

Aug 25, 2015

I received the 80% full warning then 90% full warning. Then I checked and freed some space to came back to 80% warning.

So when I started the rebalance the volume was at 80%-85%.

I have backups but recreating and reimporting data in all virtual machines is a very time consuming process.

Anyway I could not understand how I can destroy the nas using an allowed operation from the gui. At least the system should boot. Is the boot partition on btrfs too?

Thanks again,

Mario

StephenB

Guru - Experienced User

Aug 25, 2015

mgiammarco wrote:

Is the boot partition on btrfs too?

The OS runs in its own partition, on the RN102 that partition is formatted ext4.

mgiammarco
Aspirant
Aug 25, 2015
StephenB ha scritto:
The OS runs in its own partition, on the RN102 that partition is formatted ext4.
So why it does not boot? I have reinstalled os several times. How can I debug it?
- StephenB
  Guru - Experienced User
  Aug 25, 2015
  I suspect it is stuck trying to mount the data volume. Was ssh enabled?
  
  You can try the boot menu option for read-only (page 16 here: http://www.downloads.netgear.com/files/GDC/READYNAS-100/RN_OS_6_Desktop_HW_UM_26March2015.pdf)
  
  Maybe also the disk tests.
  
  I wouldn't try OS reinstall or factory default at this point. Someone from Netgear might want to try remote diagnosis.
mdgm-ntgr
NETGEAR Employee Retired
Aug 25, 2015
Sent you a PM.