NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
UPS Monitoring not working config restore
I just replaced the disks in my ReadyNAS NV (Infrant original) to expand using 2 TB disks. I backed up and did a factory reset. Everything went find with installing new disks and creating the volum...
Here are the steps I took:
1) let RAID sync finish
2) set laptop to proper subnet and logged into FrontView (192.168.168.168)
3) browsed laptop for config backup zip file and said Restore it
4) ReadyNAS prompted me to reboot, so I did
5) after reboot, logged in via restored IP address
I assume the reboot is required to apply the restored settings. I was still connected on the 192.168.168.0/24 network after doing the restore, but before rebooting.
Let me know if you need more info.
1) let RAID sync finish
2) set laptop to proper subnet and logged into FrontView (192.168.168.168)
3) browsed laptop for config backup zip file and said Restore it
4) ReadyNAS prompted me to reboot, so I did
5) after reboot, logged in via restored IP address
I assume the reboot is required to apply the restored settings. I was still connected on the 192.168.168.0/24 network after doing the restore, but before rebooting.
Let me know if you need more info.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
