NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Weird display message after powerout during resync
So I'm currently resyncing my nas after a replaced disk. Everything was running fine but this morning we had a powerout for some 15 minutes, and when the power came back on I went down and powered up the NAS again. Got "Booting" on the display, and then it turned over displaying..
"blk_rq_map_sg+418"
it just stands there, i can not connect to it, power button is not responding.
There is 4x4TB WD red disks in it and one of them was replaced yesterday due to relocate errors, so the NAS was currently resyncing at the time of the powerout.
Anyone had this message in the display before?
Well, i decided to pull the power. Put the cable back in and it booted up, Went past the "Booting.." and now says "Recover data XX.XX%" so i cross my fingers it was just a weird one-time thing.
6 Replies
Replies have been turned off for this discussion
Please let us know the firmware version you are running.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
