NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Power Supple
I have two Netgear power supply units and do not know which one belongs with my CM600 cable modem. One is Model AD2032F10, P/N 332-10751-01. The other is Model 2ABB018F, P/N 332-10748-01. Can anyon...
> Both power supply units indicate Output at the same level: 12V <-->
> 1.5A.If the connectors are the same size (inside and out), and the
polarity is the same, then either should work. As you can see from the
C600 User Manual, or, I assume, from the C600 product label, 12VDC, 1.5A
is the required output rating.> The only apparent difference is that one indicated Input of 100-120V /
> 50-60Hz / 0.56A
> The other one indicates Input of 100-240V / 50-60Hz / 0.6ASo, you could use one of them anyplace in the world, and the other
one only where the supply voltage is in the 100-120V range. Like, for
example in North America.> [...] (1) will either one damage the modem [...]
Shouldn't.
> [...] (2) does it matter at all which one is used?Not to me. The C600 User Manual does say:
Input: 110-120V, 47-60 Hz
so it's possible that the adapter with the more limited input voltage
range was supplied with the C600.
The label on the modem itself indicates 12V <--> 1.5A.
Both power supply units indicate Output at the same level: 12V <--> 1.5A.
The only apparent difference is that one indicated Input of 100-120V / 50-60Hz / 0.56A
The other one indicates Input of 100-240V / 50-60Hz / 0.6A
So, I guess my questions are (1) will either one damage the modem and (2) does it matter at all which one is used?
> Both power supply units indicate Output at the same level: 12V <-->
> 1.5A.
If the connectors are the same size (inside and out), and the
polarity is the same, then either should work. As you can see from the
C600 User Manual, or, I assume, from the C600 product label, 12VDC, 1.5A
is the required output rating.
> The only apparent difference is that one indicated Input of 100-120V /
> 50-60Hz / 0.56A
> The other one indicates Input of 100-240V / 50-60Hz / 0.6A
So, you could use one of them anyplace in the world, and the other
one only where the supply voltage is in the 100-120V range. Like, for
example in North America.
> [...] (1) will either one damage the modem [...]
Shouldn't.
> [...] (2) does it matter at all which one is used?
Not to me. The C600 User Manual does say:
Input: 110-120V, 47-60 Hz
so it's possible that the adapter with the more limited input voltage
range was supplied with the C600.