NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Ready nas 102 transfer speed
I have a Readynas 102, is seems to be a bit slow, it’s fitted with 2 4tb iron wolf drives and has a 1000mbps connection. I’ve ran a test with nas performance tester and the speeds are Write 37MB / Se...
It’s about 2 years old. I’ve just disabled ipv6 but it didn’t help☹️
PMDev wrote:
It’s about 2 years old.
Still might help (depending on what firmware you were running when the volume was created).
It's been a while since I checked the speed (my RN102 is only used for some testing). But I just took a look. I'm getting 50-60 MB/s with NASTester 1.7, using a 400 MB file size. Disabling strict sync increases the write speed to 70 MB/s, but of course doesn't affect read speeds.
Running warmup...
Running a 400MB file write on \\10.0.0.13\Videos 5 times...
Iteration 1: 73.67 MB/sec
Iteration 2: 68.34 MB/sec
Iteration 3: 74.49 MB/sec
Iteration 4: 76.29 MB/sec
Iteration 5: 66.82 MB/sec
-----------------------------
Average (W): 71.92 MB/sec
-----------------------------
Running a 400MB file read on \\10.0.0.13\Videos 5 times...
Iteration 1: 55.77 MB/sec
Iteration 2: 55.46 MB/sec
Iteration 3: 56.33 MB/sec
Iteration 4: 55.81 MB/sec
Iteration 5: 48.16 MB/sec
-----------------------------
Average (R): 54.31 MB/sec
-----------------------------
The NAS is running 6.10.8 firmware, and is using XRAID (two 1 TB Seagate Ironwolf drives).
File size definitely matters in these tests - with small files, the speeds are much slower.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
