Reply

ReadyNAS 314 Data Missing after Reboot

Cedllau
Follower

ReadyNAS 314 Data Missing after Reboot

Everything is normal before it became unsearchable in the network.

Then I shut down the NAS by pressing the power button.

After power on the NAS, it still can't search in the network.

So I installed the RaiDar to find it.

The software showed me the Status: Volume data-0: RAID Level 5. inactive: 0MB (0%) of 0MB used.

What should I do now? I don't know how to recover my workspace's NAS.

And there is not IT department in my company.

 

Message 1 of 2
StephenB
Guru

Re: ReadyNAS 314 Data Missing after Reboot

Contact paid Netgear support (using my.netgear.com).  You don't want the gearhead support.  I suggest using per-incident support for this - as it often can be easily fixed.  However, it could end up needing data recovery.  https://kb.netgear.com/69/ReadyNAS-Data-Recovery-Diagnostics-Scope-of-Service

 

If you have trouble finding the per-incident support option, you can send a private message (PM) to @JohnCM_S or @Marc_V using the envelope icon in the upper right of the forum page.

 

When you get your data back, you should

  1. Put a backup plan in place for your NAS - RAID is not enough to keep it safe.  USB backup drives are a cost-effective option.
  2. Upgrade your firmware - it is five years old, and very out-of-date.  You should be using 6.9.6 (current "long term support" firmware), or 6.10.3 (current "stable" firmware).
Message 2 of 2
Top Contributors
Discussion stats
  • 1 reply
  • 311 views
  • 0 kudos
  • 2 in conversation
Announcements