NightHawk XR1000 Gaming routerXR1000 1.0.0.64_1.0.49 I am on Etisalat (my internet provider), i need to enable IPV6 so that i need to know which option should i choose so that Ipv6 is enabled.

If your ISP Modem already has a built in router and wifi. This would be a double NAT (two router) condition which isn't recommended. https://kb.netgear.com/30186/What-is-Double-NAThttps://kb.netgear.com/30187/How-to-fix-issues-with-Double-NATCouple of options,1. Configure the modem for transparent bridge or modem only mode. Then use the Orbi router in router mode. You'll need to contact the ISP for help and information in regards to the modem being bridged correctly.2. If you can't bridge the modem, disable ALL wifi radios on the modem, configure the modems DMZ/ExposedHost or IP Pass-Through for the IP address the Orbi router gets from the modem. Then you can use the Orbi router in Router mode.3. Or disable all wifi radios on the modem and connect the Orbi router to the modem, configure AP mode on the Orbi router. https://kb.netgear.com/31218/How-do-I-configure-my-Orbi-router-to-act-as-an-access-point and https://www.youtube.com/watch?v=H7LOcJ8GdDo&app=desktop Try option #2 first...

Ipv6 What option should i choose?

8 Replies

FURRYe38
Guru - Experienced User
Mar 30, 2023
Copy Link
I would ask the ISP, the ISP should have this information.
- immuda
  Tutor
  Mar 30, 2023
  Copy Link
  My ISP says ask netgear
  - FURRYe38
    Guru - Experienced User
    Mar 30, 2023
    Copy Link
    I guess try AUTO.
    
    https://kb.netgear.com/24009/How-do-I-use-auto-configuration-to-set-up-an-IPv6-Internet-connection-on-my-Nighthawk-router
    
    https://kb.netgear.com/24008/How-do-I-use-auto-detection-to-set-up-an-IPv6-Internet-connection-on-my-Nighthawk-router
    
    https://kb.netgear.com/24006/How-do-I-set-up-an-IPv6-Internet-connection-on-my-Nighthawk-router
    
    https://kb.netgear.com/24012/How-do-I-set-up-a-fixed-IPv6-Internet-connection-on-my-Nighthawk-router
    
    Be sure the ISP provides native IPv6 support. Again they should have this information. Modes depends on what the ISP puts out. Not what the router can do. It depends on what the ISP configures IPv6 for there services.

Forum Discussion

Ipv6 What option should i choose?