NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Same Router use as Extender Nighthawk ac3200
Hello all, i have purchase 4 Wifi router i.e. Nighthawk x6 AC3200 r8000, and i want to connect eachother as a extender, my first router is my main router and all others are connect to it vai a ...
> [...] All are wireless devices. Only access points are connecte with
> wires.
And that's the reason. The access point itself sees a wireless
connection, but the router sees only the wired connection (from the
access point).
When a wireless device connects to the router's built-in access
point, the router knows that it's a wireless connection; everything else
is a wired connection (so far as the router knows).
I have 1 main router and 11 ( access point router) same model.
i used same config for all routers....i.e same ssid, password, and same channel also.
but the problem is my 2.4 ghz signal are weak...signal can't break 2 walls..signal goes to zero.
channel for 2.4 ghz is Auto
channel for 5ghz (1st band ) 36
channel for 5ghz (1st band ) 149
channels are for all 12 routers
any suggestion..
> any suggestion..
https://community.netgear.com/t5/x/x/m-p/1652694#M107590
- I got your answer...thanks for help
One more questions.
Users are connected to my access point but they are showing as wired connect ,not showing in 2.4 ghz band and 5 ghz band..
All are wireless devices. Only access points are connecte with wires.> [...] All are wireless devices. Only access points are connecte with
> wires.
And that's the reason. The access point itself sees a wireless
connection, but the router sees only the wired connection (from the
access point).
When a wireless device connects to the router's built-in access
point, the router knows that it's a wireless connection; everything else
is a wired connection (so far as the router knows).
