Adding Satellite to a Costco NightHawk Mesh System

Question

I am not sure I selected the right model. But, it is the mesh system that came from my purchase at Costco. I purchased another satellite that I want to add to this system. I bought mine used on eBay. I see that you can buy them new on Amazon.

I can't find anything on how to add the satellite by searching Google. In my case, I configured the mesh system in bridge mode (the router is plugged into my ethernet switch.) I couldn't find any instructions for that either, and of course the app is useless if that is what you want to do.

After playing around, I managed to get the new satellite connected to my system by connecting it by ethernet cable to one of the satellites and hitting sync on the new satellite. That gives me a solid line in the app network map. When I unplug the cable, the new satellite no longer has an IP, it is not connected by wifi to the router. This is, of course, how I want to use it, as a wireless satellite.

Why is this so hard? How do you connect up another satellite to an existing mesh system?

MTUser2013 · Answer

Please below for the inline answersplemans&nbsp;wrote:Maybe amber? Yesis it solid/pulsing? SolidIs it just the satellite with the issue? Yes, the new one I am try to add.&nbsp;Do you know what firmware is on the router and what one is on the satellite? No. How would I find out? Disconnect it and plug in a cable and do below like for the satellite?&nbsp;if the satellite doesn't connect to the router, you should be able to hardwire a pc/laptop into the ethernet port on the satellite. Then use 192.168.1.250 to connect to it (default address if not connected). that'd let you check firmware/upgrade it if needed.&nbsp;&nbsp;you can find manuals, firmeware here:&nbsp;https://www.netgear.com/support/product/mk62.aspx&nbsp;OK. I will check on the firmware and see if it needs upgraded. I note you&nbsp;&nbsp;

plemans · Answer

What model mesh system do you have?&nbsp;What satellite model are you trying to connect?

MTUser2013 · Answer

plemans&nbsp;wrote:What model mesh system do you have? The router says MR60 on the bottomWhat satellite model are you trying to connect? The new satellite says MS60 on the bottom.&nbsp;

plemans · Answer

here's the install guide for the mk systemHow do I install my NETGEAR Mesh WiFi 6 System? | Answer | NETGEAR Support&nbsp;

MTUser2013 · Answer

plemans&nbsp;wrote:here's the install guide for the mk systemHow do I install my NETGEAR Mesh WiFi 6 System? | Answer | NETGEAR Support&nbsp;I've tried this several times. The satellite is within 3 feet of the router.&nbsp; The light stays orange. I see a pin hole and the label reset. Can that help solve this problem?&nbsp;

Forum Discussion

Adding Satellite to a Costco NightHawk Mesh System

7 Replies