NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
The gig is up -- the new AX12 will be D.O.A.
The AX12 appears to have NO DFS channel support.
This is according to Netgear's own product page (no DFS mention; whereas routers with DFS support mention that), and FCC documents (PY317300397)...
The AX8 and AX12 are (to my knowledge) complete different hardware platforms. So at the time of filing with the FCC, obviously DFS wasn't ready. Now a good part of the RF security code isn't implemented by the router and AP vendors Much more it's code operating on the embedded radio devices, provided by the chip/radio maker. The control and influence on this code is limited.
Instead of the AX8 has it blablah it would be much more interesting to see if the competitors implementing similar SoC and radios as in place on the AX12 are able to do any different.
Cannot go by what a product announcement is before it is actually on the shelves. Lots can change including FCC approval of the DFS support. Even if not first ship I am sure it will be included with a firmware update.
Im using the AX8. It has DFS which I dont use anyway because my Samsung and Roku TV's wont connect. There isn't even a release date for the AX12, it also states it will only be available thru the Premier Beta (whatever that is).
schumaku, Yes, wikidevi says RAX80 is based on BCM43684 (Broadcom), but the RAX120 is based on QCN5154+QCN5124 (Qualcomm)
myersw, I would not buy any router in 2019 without DFS support present up front. Because not all netgear routers get DFS support later.
dmystic1, does it support ALL DFS channels (see duckware.com/wifi#5g for list; especially 144)?
Based on my experience with Netgear Broadcom based routers I would not even consider the AX80. Now Qualcomm is a different story. Have had good luck with them in the past and some 3rd party dev might even make a build.
