Orbi satellite daisy chain via switch

[Darrelltate]

Wondering if I can connect two orbi satellites via Ethernet through a switch. 

1st satellite is connected via wifi to router. 
This satellite is connected to a switch via Ethernet. 
Wondering if I can connect a second satellite to the same switch, rather than Wi-Fi, to increase speed and strength of signal. 

thank you for any feedback you can provide. 

darrell

[Chuck_M · Accepted solution]

Yes, that is exactly how mine is set up.   2 x wired, 1 x wireless.   Just make sure your switch is not "green"

[Chuck_M · Accepted solution]

Yes, that is exactly how mine is set up.   2 x wired, 1 x wireless.   Just make sure your switch is not "green"

[FURRYe38]

https://kb.netgear.com/000051205/What-is-Ethernet-backhaul-and-how-do-I-set-it-up-on-my-Orbi-WiFi-Sy...

[FURRYe38]

NG GS-105/108v4, D-Link DGS-105/108 and HP ProCurve 1400/1800 series switches work for Orbi systems. 

[Darrelltate]

Thank you!!

it occurred to me that I could just connect satellites via Ethernet cable and then connect the switch to the second satellite. 

thanks again for taking the time to reply. 

[FURRYe38]

You can do that too. 

Enjoy.