We’ve been monitoring issues that some customers have experienced in OrbiOS 2.1.4. In response, we’re releasing firmware that provides a permanent fix for the homekit issue along with various other fixes. Please use the manual firmware upgrade process to apply to your Orbi.
Release note:
Fixes issues with the Apple HomeKit connectivity
Fixes the wireless crash and reboot issue when the router is under stress
Fixes WiFi disconnection and IOT issues
Fixes an issue where devices on the Guest Network are able to see (but not connect to) some devices on the main network
Fixes an issue where device boot order caused devices connected over Ethernet Backhaul to connect wireless backhaul
Updates the OpenVPN certificatefrom MD5 to SHA-256
The Guest Network is still NOT isolated with this new Firmware version 2.1.4.16 in the link below. I can’t believe this is still an unresolved topic and we are continued to be taunted with this unless check box in the Guest Network Settings “Allow guests to see each other and access my local network” ….WHY do you hate us.. the loyal customer that goes out of our way to spend time writing on the community board time and time again about the same unresolved topic?... but I hear Orbi Pro is doing fantastic.. thanks to the Obri Home community complaining about this over and over again and @johngm reading the post.Good job testing before you got my hopes up with the exquisite release notes..
Fixes an issue where devices on the Guest Network are able to see (but not connect to) some devices on the main network
NOPE!
Model: RBK50| Orbi AC3000 High-Performance Tri-Band WiFi System
Having a great experience with firmware 2.1.1.14 after I increased the Advertisement Time to Live(in hops) to 16 in UPnP section under advanced settings. File transfers are rock solid now.
Just updated to 2.1.4.16 and expect continued good results.
It took a long time to get the firmware right, but now I'm loving my Orbi system. No complains here. Good job!
Model: RBK50| Orbi AC3000 High-Performance Tri-Band WiFi System
Does anyone know if the Orbi system will auto-update to a non-beta firmware after we install beta firmware? i.e., if I install the 2.1.4.16 update, when Netgear releases the final version, will Orbi auto-update as usual, or will I have to manually install the public release?
Still haven't fixed ethernet backhaul. I updated my RBR50 and satellite to this firmware, all was well for a minute or two, then the network crashed and had no internet. Multiple reboots and still no internet. I unplugged the ethernet backhaul link and rebooted the router and all is working again on the wireless backhaul...ugh.
Still haven't fixed ethernet backhaul. I updated my RBR50 and satellite to this firmware, all was well for a minute or two, then the network crashed and had no internet. Multiple reboots and still no internet. I unplugged the ethernet backhaul link and rebooted the router and all is working again on the wireless backhaul...ugh.
No, no switches in between. Was working OK prior to the firmware upgrade. After the firmware upgrade, systems were all running ok for a few minutes, then it all came down.
Ok, if you have done reboots, disabled Daisy Chain and such, I would do a factory reset on both satellite and router and set up from scratch.
After the router is set up and Daisy chain is disabled first. Disconnect ALL other LAN cable devices accept for 1 wired PC. Re-add the satellite via wifi. Let is sync and get BLUE led on top. Then reconnect the Satellite with the ethernet cable. Give 5 minutes and wait for the top BLUE led to appear. YOu could do this with the Satellite near the router if you want to, then if you can get the satellite synced with wired back haul, turn off then replace back at remote location. Then re-connect all other LAN devices back to the router.
No, no switches in between. Was working OK prior to the firmware upgrade. After the firmware upgrade, systems were all running ok for a few minutes, then it all came down.
Oh i see the issue now. The firmware download site does not really allow you to concurrently download multiple firmware updates at the same time. If you do that, it will get only one version of the firmware update.
Model: RBK53| Orbi Router + 2 Satellites Orbi WiFi System
This is what happened. I clicked on the link to the firmware update for RBR50 first, which opened a new tab in Safari. Then i clicked on the link for RBS50 and it opened another new tab. When i went to the tab for the RBR50 firmware update and click on "Download file", it proceeded to download RBS50-V2.1.4.16.img. I was incorrect when i mentioned concurrent download was an issue. Looks like the issue is with opening multiple tabs to different firmware updates in the browser (Safari). If you didn't click on the "Download file" link in the first tab to download the firmware update before you open a second or third tab for a different firmware update, the firmware update in the last opened tab will be the one you will be downloading even if you go back to the first tab to download that different firmware update.
I see that performing a factory reset is being mentioned again.......... I do hope we don't have to do this with every firmware..... I mean I have an orbi outdoor unit & having to unscrew it is a pain in the a$$ =(
Sure, no problem. When I tried to transfer any movie file to my Nvidia Shield HD it would transfer about 75% for the file (2.5 GB) and then time out. By increasing the hop times I was able to complete the transfers without a problem. It may be an Android OS thing, but this got it working.
Model: RBK50| Orbi AC3000 High-Performance Tri-Band WiFi System
I am so sick of this pile of crap, wired backhaul causing the entire unit to crash every 5 seconds. WiFi is unusable with this new SW version. 2.1.4.16 Yes I’ve started with a factory reset, and have tried re-booting router and RBS50, no luck here. Had to ditch the wired backhaul. What a pile. Would never recommend this to my worst enemy. Netgear what gives? Are you employing incompetent people?
if one of my companies products worked like this we would throw our best staff at the problem, and work 24/7 to get it right. You are destroying your reputation by allowing this to continue.
frustrated consumer that gave netgear over $600.00 only to be regretting it.
2.1.4.16 seems to be working well, wireless and wired seem to be a little more zippy now, no problems with my wires backhaul either, in speed tests I am seeing jitter at or close to 0 prior to this update it was 1 to 2 ms. Those having issues might want to try a factory reset.
