Orbi not giving full bandwidth -Orbi AC3000

[bobselff]

Need some help please as I'm at a loss. I have internet with 350 megs. When I test the internet speed using the orbi app it shows 320-350 which is perfect. When I connect my Ipad and run a test in the same room as the main orbi router i only get 80-100. The connected devices all look legit except  Arcadyan Technology which an earlier post said was orbi.

Need some help please.

Thanks,

Bob

[FURRYe38]

What FW is currently loaded?
What is the Mfr and model# of the ISP modem the NG router is connected too?
Is the Orbi system operating in Router or AP mode?

What is the size of your home? Sq Ft?
What is the distance between the router and satellite(s)? 30 feet is recommended in between them to begin with depending upon building materials.

What channels are you using? Auto? Try setting manual channel 1, 6 or 11 on 2.4Ghz and any unused channel on 5Ghz.
Any Wifi Neighbors near by? If so, how many?
What WPA security modes are you using? Try WPA2 and AES only.

Depending upon the iPad, it may only be able to test at 100Mb. IF other devices are testing good an the iPad isn't, possible issue with the iPad.

What iOS are you using on the iPad? 

What generation model# is the iPad? 

Orbi app is being used on which device? 

Do wired PC speeds work? 

[bobselff]

Router Firmware Version V2.2.1.210

Modem: Netgear CM600

Operating as: Router

Home Size: 1900 sqf

Distance about 25-30 feet

Channels: Auto

Neighbors: 5

WPA - WPA2

Orbi App - Phone and Ipad

You were correct on the ipad, only goes to 100. I tried my phone downstairs and its at 300+.(Playstation Downstairs)

My main concern was my sons playstation. I was using the ipad to test. It seems wired or wireless his speeds fluctuate from 30-135.Connections to the satelltes show good. 

[bobselff]

Region Selection
Region:	Africa Asia Australia Canada China Europe India Japan Korea Malaysia Mexico Middle East(Algeria/Syria/Yemen) Middle East(Turkey/Egypt/Tunisia/Kuwait) Middle East(Saudi Arabia) Middle East(United Arab Emirates) Russia Singapore South America Taiwan North America
Advanced Wireless Settings (2.4GHz b/g/n)
Enable SSID Broadcast
Enable Wireless Router Radio
(This action is currently disabled until the wireless On/Off button is pressed)
Enable 20/40 MHz Coexistence
Enable WMM (Wi-Fi multimedia) settings
Fragmentation Length (256-2346)
CTS/RTS Threshold (1-2347)
Preamble Mode	Automatic Long Preamble Short Preamble
Transmit Power Control	100% 75% 50% 25%
Turn off wireless signal by schedule
The wireless signal is scheduled to turn off during the following time period:
Period Start End Recurrence Pattern
Advanced Wireless Settings (5GHz 802.11a/n/ac)
Enable SSID Broadcast
Enable Wireless Router Radio
(This action is currently disabled until the wireless On/Off button is pressed)
Enable WMM (Wi-Fi multimedia) settings
Fragmentation Length (256-2346)
CTS/RTS Threshold (1-2347)
Preamble Mode	Automatic Long Preamble Short Preamble
Transmit Power Control	100% 75% 50% 25%
Turn off wireless signal by schedule
The wireless signal is scheduled to turn off during the following time period:
Period Start End Recurrence Pattern
WPS Settings
Router's PIN:
Enable Router's PIN
To prevent PIN compromise, auto disable the PIN after failed PIN connections, until router reboots. In auto disabled mode, router's WPS LED will keep blinking slowly
Keep Existing Wireless Settings
Enable HT160
Wireless Card Access List
Backhaul Topology
Enable Daisy-Chain Topology
Backhaul Password
Orbi can generate a new hidden password to improve security for its backhaul connection.
WARNING: Generating a new password might cause the Orbi satellite to lose connection from the Orbi router. To reconnect, use the Sync button.
Enable Implicit BEAMFORMING - Boosts WiFi speed, reliability, & range for all mobile devices
Enable MU-MIMO
Enable Fast Roaming All boxes checked except Enable Fast Roaming

[FURRYe38]

Not too sure how good playstation speed test app is. As long a you tried another wireless device and try a PC wired an speeds are good there. You'll be fine.