Re: OS 6.10.5 - Cannot install application Docker CE CLI
I tried running the docker daemon
$ sudo dockerd
But it fails when tyring to load up iptables module.
Error starting daemon: Error initializing network controller: error obtaining controller instance: failed to create NAT chain DOCKER: iptables failed: iptables --wait -t nat -N DOCKER: iptables v1.4.21: can't initialize iptables table `nat': Table does not exist (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
(exit status 3)
Re: OS 6.10.5 - Cannot install application Docker CE CLI
I'm bit by this as well. I tried to remove and reinstall via command line and get the following:
The following packages have unmet dependencies: docker-cli-rnapp : Depends: linux-image-extra but it is not going to be installed Depends: docker-ce (>= 17.09.0~ce-0~debian) but it is not installable
Re: OS 6.10.5 - Cannot install application Docker CE CLI
Update on my efforts. Adding Docker to 6.10.5 via the pre-build DEB or adding the Docker source both fail.
I was able to roll back to 6.10.4 and install docker-ce again. It failed via the web interface so I had to use apt and guide the system through the installation issues. Plymouth keeps failing but appears to not be needed, portainer is failing to install afterwards so I manually installed the latest via docker command.
Another thing to watch out for, removing the old docker-ce removed my storage so I'm starting over on all my docker containers.
Re: OS 6.10.5 - Cannot install application Docker CE CLI
I flashed the firmware manaully and it took, not sure it is the safest thing to do. I have some UPC weirdness on that box sending low battery alarms which I'm trying to isolate now so there may be some negative effects.
Re: OS 6.10.5 - Cannot install application Docker CE CLI
Some addons do need the Kernel Plus addon as well. In another thread, a user reported that was the solution to his Docker issue, though I believe he also had to do some re-configuring, but I don't know whether that was because of other things he tried first or is always necessary..
Re: OS 6.10.5 - Cannot install application Docker CE CLI
My understanding of the Kernel Plus app is that it installs linux-image-extra (possibly among other things). Since linux-image-extra is specific to an OS version, I would think you'd need to do something to get it to update. But I don't know if Netgear has actually updated it or how one goes about updating it since it doesn't list a version number that corresponds to an OS build..
Re: OS 6.10.5 - Cannot install application Docker CE CLI
here's what WhoCares has to say about the latest release, maybe this will help. I peronsally have already deleted both docker and crashplan from my system and moved on to a different solution, but i will be following this to see if anyone gets docker working
here's what WhoCares has to say about the latest release, maybe this will help. I peronsally have already deleted both docker and crashplan from my system and moved on to a different solution, but i will be following this to see if anyone gets docker working
Re: OS 6.10.5 - Cannot install application Docker CE CLI
So I followed WhoCares advise....and was able to reinstall the Docker App from Netgear app store, and its now running accoding to ps -ef....
Unfortunately since I compeltely removed it earlier, I don't have anything setup with docker to futher test, and I won't have any time to do so anytime soon...I changed over to using my mac to drive my crashplan sessions and backing up from ReadyNAS SMB share..which is actually working fine and lets me backup some mac stuff too on one subscription...so probably I will stick with that for the time being....and I didn't have anything else serious on docker...but still anyway, I would like to hear from others if this solves the docker problem for them.
Re: OS 6.10.5 - Cannot install application Docker CE CLI
I haven't downgraded my system yet - since I havne't found a good time to do that (and have enough time to restore from backup if needed). But did try the WhoCares steps.
While that upgraded all my system packages, I still am unable to run docker.
It won't install via the applications page but it's already installed on my system.
Running dockerd gives me the same error as before. =(
> sudo dockerd
.
.
.
Error starting daemon: Error initializing network controller: error obtaining controller instance: failed to create NAT chain DOCKER: iptables failed: iptables --wait -t nat -N DOCKER: iptables v1.4.21: can't initialize iptables table `nat': Table does not exist (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
(exit status 3)
