ReadyNAS NV+ iSCSI Enterprise Target by WhoCares

Hello - were you able to get the file iSCSItarget_1.4.20.2-readynas-1.0.4.bin

I am also looking for it

G'day youknowwho,

Unfortunately no, however based upon a reply in another forum (http://forums.whirlpool.net.au/forum-replies.cfm?t=2219428) which pointed me to http://whocares.de/readynas-goes-iscsi/ I was able to find the appropriate files from my other ReadyNAS NV+ that *did* had the iscsi.bin installed.

Seems the old iSCSI target has gone the way of the dodo and nobody seems to care about readynasfreeware.org being unavailable.

Some of the add-ons from readynasfreeware.org have already been moved to rnxtras.com. I would suggest you keep an eye on https://rnxtras.com/addons/category/readynas-os4-sparc

https://rnxtras.com/add-ons/resurrectio ... parc-16864

-Stefan

Thank you Stefan.

The add-on loads what appears to be the correct files in the operating system but at the same time it renders all functions in front-view useless {:?o You can adjust their values but when you hit 'Apply' it just defaults back to what it was originally.

Running 4.1.13, just did a factory reset too and tried again - same thing.

Heya, back again.

I take it back about all files being in the correct place, I had to perform the following to start the iSCSI daemon: -


NASXXX:/# /etc/init.d/rfw-iscsi-target start
Starting iSCSI Target: ietdFATAL: Module iscsi_trgt not found.
failed!
NASXXX:/# depmod -a
NASXXX:/# /etc/init.d/rfw-iscsi-target start
Starting iSCSI Target: ietdFATAL: Module iscsi_trgt not found.
failed!
NASXXX:/# cd /lib/modules/2.6.17.8ReadyNAS/kernel# ls -lrt
NASXXX:/lib/modules/2.6.17.8ReadyNAS/kernel# ls -lrt
total 32
drwxr-xr-x 2 root root 16384 Sep 11 2009 rfw-iscsi
drwxr-xr-x 2 root root 16384 Sep 11 2009 rfw-crypto
NASXXX:/lib/modules/2.6.17.8ReadyNAS/kernel# cp -rp * /lib/modules/2.6.17.14ReadyNAS/kernel/
NASXXX:/lib/modules/2.6.17.8ReadyNAS/kernel# /etc/init.d/rfw-iscsi-target start
Starting iSCSI Target: ietd.
NASXXX:/lib/modules/2.6.17.8ReadyNAS/kernel#

These additional steps were found from this post: viewtopic.php?f=36&t=46500