NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
ReadyNAS DUO V2 Dashboard
I had a disk crash on my ReadyNAS DUO V2 (ARM version), so I bought a replacement disk, installed it, did a factory reboot (after removing all volumes from the other old disk), and then rebuilt the FlexRaid type 0. I did this via Raidar and it has all worked as confirmed by Raidar showing the disks in green, the Raid in green, firmware at 5.3.7, correct IP address etc.etc.
However, if I try to access the Dashboard after entering the default login / password the Dashboard logo appears (ReadyNAS Dashboard 1.0.0.264) with the cycling circle loading logo and it just sits there and does not enter the Dashboard. Occasionally a disk I/O light flashes on the ReadyNAS like it is trying to provide the interface but nothing happens.
Anyone get any suggestions as to how I get past this as I need to load some applications etc. ?
However, if I try to access the Dashboard after entering the default login / password the Dashboard logo appears (ReadyNAS Dashboard 1.0.0.264) with the cycling circle loading logo and it just sits there and does not enter the Dashboard. Occasionally a disk I/O light flashes on the ReadyNAS like it is trying to provide the interface but nothing happens.
Anyone get any suggestions as to how I get past this as I need to load some applications etc. ?
1 Reply
Replies have been turned off for this discussion
- OK I have answered my own question.
I was using IE10 when it failed to access the Dashboard. Hit the compatibility button (the one that allows older browsers to be emulated) and bingo it logs in.
Hope that helps anyone else who discovers this problem.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
