NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Readynas 516 question concerning drives
I have 4 disks in the readynas The fourth disk is colored in red & it advises to "Please Remove inactive volumes in order to use disk Disk#4" when i am in Raidar it states that it's Xraid and be...
Firmware is 6.2.4
Disk 1 is WD Red 2tb
Disk 2 is WD Red 2tb
Disk 3 is WD Red 3tb
Disk 4 is WD Red 2tb
These disks were all in a Readynas RNDU4000
Upon getting the 516 I put in disk #1 & did a factory reset. I then put in the other 3 disks in & disk 2 & 3 show fine on frontview. I have also tried reinserting disk 4 with the nas on & also tried turning off the nas & then inserting disk 4.
I do not have a backup as of yet.
I am also using a Mac if that makes any difference or not?
thanks
Have you put data on the volume?
i would remove disk 4, attach it to your Mac, delete any partitions then hot reinsert it. Don't format it on the Mac.
if this does not work, then test disk 4 using wd lifeguard long test.
Make a backup.
i will try this!
Thanks for your help
Hi muleycrazy,
Just to add on to the response of vandermerwe to you, here is the link below where you can download the WD Data Lifeguard Diagnostics for Windows:
http://support.wdc.com/product/download.asp?groupid=612&sid=3
Cheers,
DaneA
Netgear Community Team
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
