NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
802.11ac
3 TopicsWAC104 Unable to Control WiFI Channel BandWidth
I setup 4 WAC104 as Acces Points, and there are no settings available to limit channel Bandwidth in 2.4 and 5GHz spectrums. There is a compatibility setting which appears to give no control over BandWidth. The shopping Center is very congested and I would like to force SSID "VillageLife" to 20MHz (See attached Images). This should be a setting to make it more friendly in congested areas. Apple devices do not use 40MHz, only 20MHz. Am I missing something? I contacted Tech Support and they claim there is no setting to limit Bandwidth, and told me to post it here. Most WiFi AP units I have dealt with allow you to limit bandwidth, so I'm surprised to see there is no bandwidth setting, and therefore hard to recommend to other clients (we like the 4 LAN ports SWITCH, allowing us to hardwire local computers to Ethernet and not WiFi).23KViews1like2CommentsUnable to connect to R7000 AC network
I just purchased an RNX-AC1300PCE Wireless Dual Band PCI-Express Adapter. After installing it, however, I can only connect to my R7000's 5GHz network in 802.11a or the 2.4GHz network in 802.11. I have been able to connect to a nearby xfinitywifi 802.11n network, but I cannot connect to mine in either n or ac. I purchased this card for the specific purpose of connecting via AC and it's just not working. Previously I was using a built-in wireless component, which was able to connect to both my R7000 and the xfinitywifi network, getting 72 Mbps. I am therefore only able to get a maximum of 54 Mbps on my R7000 via a or g, (and upwards of a few hundred on the nearby xfinitywifi network on n), rather than the much, much larger number promised. I've tried the drivers that came on the adapter's CD as well as those I downloaded from the Rosewill website. The RNX-AC1300PCE driver date is listed as 2/6/2014 and the version is 6.30.223.228. The firmware version on the router is 1.0.7.2_1.1.93. I am running Windows 10, which is listed as one of the supported OS versions for the adapter. Settings on the adapter's hardware: 20/40 Coexistance: Auto 40MHz Intolerant: Disabled 802,11h+d: Loose 11h 802.11n Preamble: Auto Antenna Diversity: Auto AP Compatibility Mode: Higher Performance Association Roam Preference: Disabled Band Preference: None Bandwidth Capability: 11a/b/g:20/40MHz BeamForming: Enabled Bluetooth Collaboration: Auto BSS PLCP Header: Auto (Short/Long) BT_AMP: Enabled Disable Bands: None (Note: I tried "Disable 802.11a" which just made me unable to connect to the 5GHz network entirely) Disable Upon Wired Connection: Disabled Fragmentation Threshold: 2346 IBSS 54g(tm) Protection Mode: Auto IBSS Mode: 802.11a/b/g/n Auto Locally Administered MAC Address: Not Present Minimum Power Consumption: Disabled Mixed Cell Support: Disabled Power Output: 100% Priority & VLAN: Priority & VLAN Disabled QAM256: 3 Rate (802.11a): Best Rate Rate (802.11b/): Best Rate Roam Tendency: Auto Roaming Decision: Auto RTS Threshold: 2347 Short GI: Auto WMM: Auto WZC IBSS Channel Number: 11(20MHz) XPress (TM) Technology: Enabled There are a lot of settings for the router, and I can't find a way to copy them all easily, so I will include here just the "Wireless Setup" section: Region: North America Enable Smart Connect: No Wireless Network (2.4GHz b/g/n) Enable SSID Broadcast: No Enable 20/40 MHz Coexistance: No Name (SSID): ******** Channel: 01 Mode: Up to 600 Mbps Transmit Power Control: 100% Security Options WPA2-PSK (AES) Password (Network Key): ********************************* Wireless Network (5GHz a/n/ac) Enable SSID Broadcast: No Name (SSID): ***** Channel: 157 Mode: Up to 1300 Mbps Transmit Power Control: 100% Security Options WPA2-PSK (AES) Password (Network Key): *********************************Solved7.1KViews0likes11Comments¿tienes dudas de cual es el modelo de gestión wireless ideoneo para tu negocio?
¿tenéis dudas de cual es el modelo de gestion wireless ideoneo para vuestro negocio? en este post lo vamos a resumir de forma muy sencilla. Con la introducción de los puntos de acceso 802.11 ac se han introducido el cuarto modo de gestión centralizada wireless netgear, permititen escoger entre el mejor modelo adaptado a las necesidades del cliente y a su presupuesto. - Modo stand alone: El modelo tradicional de gestion de puntos de acceso configurando todos los parametros en el propio dispositivo sin capacidad de gestion centralizada. este modelo se recomienda para aquellas instalaciones sencillas que no necesiten funciones de portal cautivo y en la instalacion solo sea necesario un AP. http://netgear.es/business/products/wireless/business-wireless/ - Modo Ensemble: modelo de clusterización o gestión virtualizada. En el que un punto de acceso toma el control de la gestión y monitorización de hasta 10 puntos e acceso, simplifica la configuración y administración de una red pequeña de puntos de acceso que no tienen requerimiento ni de fast roaming ( movimiento de cliente entre puntos de acceso) ni de portal cautivo editable. En este modo no es necesario adquirir licencias y está disponible en la familia WAC720 y WAC730. escoge tu modelo en: http://netgear.es/business/products/wireless/business-wireless/ - Modo Controller: Para aquellas instalaciones que requieran funciones avanzadas como fast-roaming, portal cautivo, control dinamico de RF, solucion de sombras de cobertura, balanceo de usuarios o gestión de entornos de alta densidad es el modelo de gestión ideal. Mediante el controlador hardware se permite tener una visión global de la infraestructura permitiendo tomar las mejores decisiones para una buena experiencia WiFi. Los 3 modelos escalables permite cubrir sin sobrecostes, redes de hasta 15 APs (300-400) usuarios con WC7500, redes de hasta 150 APs conn WC7600 y 600 APs con WC9500. Los entornos ideales para la gestion centralizada son centros educativos superiores, centros comerciales o de ocio, industria y logistica, entorno empresarial, hoteles, hospitales.. Descubre mas en: http://netgear.es/business/products/wireless/wireless-management/ - Modo Business Central: Business central es la gestión cloud WIFI de Netgear. Este controlador cloud permite gestionar-monitorizar puntos de acceso desde el cloud sin necesidad de añadir infraestructura hardware adicional como controladoras o VPN para la gestion wireless centralizada. Mediante este modelo de gestion se simplifica la administracion de una red wireless distribuida geograficamente sin perder los beneficios de un controlador Wireless. Este modelo es ideal para entornos distribuidos como cadenas de restauracion-ocio y retail como cafeterias, restaurantes, tiendas, asi como tambien para empresas que tengan varias delegaciones u oficinas distribuidas. En el caso del cloud no hay limite de dispositivos a gestionar y su modelo de pago es basado en uso, de forma que si la plataforma no se usa no se consume licencias y permite un crecimiento o añadir nuevos dispositivos sin necesidad de adquirir licencias asociados al dispositivo. Descubre como en el siguiente enlace: http://businesscentral.netgear.com/es/?cid=wmt_netgear_organic Para finaliza os adjunto un pequeño PDF con mas informacion sobre estos modos de gestion y sus diferencias Como siempre para cualquier duda puedes contestar en este post o bien de forma privada en jgarcia@netgear.com Saludos Jordi Garcia NETGEAR Iberia System Engineer3KViews0likes0Comments