NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
CMD31T
4 TopicsNetgear CMD31T blinking lights
My main question is what does it mean when both upstream/downstream pairs blink amber? I recently moved and changed services. About a week ago, my networking equipment was working perfectly. I've since called my ISP three times, each time there was different things possibly wrong. I'm mainly posting here hoping that I'm missing something obvious on my end. If it's helps or is considered relevant information, I'm dealing with TWC/Spectrum's internet service. Thanks for the help.Solved6KViews0likes3CommentsOrange light on CMD31T modem
This refurbished unit worked fine for a few minutes last week when I put it online with a new N600 router. But then the connection stopped and I presumed Comcast did that automatically. But today a helpful Xfinity tech ID#157919 spent an hour with me on the phone. He says the modem is authorized, its MAC number checks OK. We tried swapping cables, did a reset and also power disconnect/reconnect. We took the modem to another room and put it in place of a working Xfinity TV modem. But throughout the time of his session with me, the US 3/4 light would power back up to solid orange while the other three lights would go solid green. I don't know anything about this stuff, but the Xfinity technician sure is earnest about helping, and is curious about this condition he cannot affect from his end, and he will phone me tomorrow to see what I learn from this community or from Netgear email support (I have just written them) during the meantime. FWIW,I just noticed that the (formerly solid green) US 1/2 light is now solid ORANGE, and the (formerly solid orange) 3/4 light is OFF. Ideas, please? Thanks very much, ReidSolved9KViews0likes5CommentsCMD31T Failed After 9 months - Netgear's response astonishing and totally unacceptable
This is my first (and will be my last) Netgear experience. My experience can only be explained if Netgear's mantra is "the customer always comes last": I purchased a CMD31T Cable Modem for around $75 in September 2014 (from Microcenter at their strong recommendation). It failed after 9 months (whereas its Motorola predecessor had still been working faultlessly after 7 years - but I just didn't want to pay the cable company $70 a year anymore). I have seen other postings about these units running extremely hot - that was the case here too. So I'm sure mine is a bad unit (or maybe the product is simply a bad design). After many wasted hours repeating the installation process - no joy. So I called Netgear support 7/11/15 and, to my utter astonishment, they wanted me to pay $120/year for a year's support before they would try to troubleshoot. Apparently my Netgear support warranty was only 90 days and had expired. When I explained that it was still under their 12 month limited warranty, and I simply wanted my money back, I was told that was not possible until they could prove it was not working - and to provide that proof I had to pay them for $120 worth of support! I was told Netgear would have to access my PC and make changes to it's internal IP settings - no thank you. So the next morning I bought an Arris Cable Modem which worked straight out of the box (without requiring any changes to my PC settings). It has been perfect so far (not to mention the superb documentation and easy setup which puts the Netgear's in the shade). Heads up Netgear - the Arris runs cool - its housing is riddled with effective cooling holes!! The Arris only cost me approx. half of NetGear's proposed annual support contract fee! But I still want my money back for the unusable Netgear CMD31T...... So, on 7/21/15 I called NetGear support again and explained the history, again requesting a refund..... But - this time I was told a refund is out of the question (!!) and that the best I would get is a replacement unit (dubious value to me - but I have lost my money so a new unit is better than my current situation). Again I was told I would have to prove it was faulty - by "running some diagnostics on the Netgear support page and calling back with the outcome". I explained that I have zero desire to unplug my working Arris unit, plug in the bad Netgear one, then have my cable provider temporarily reset their MAC address records just to run diagnostics (and be offline in the mean time - which includes my VOIP phone connection). I was then assured I could just run some diagnostic steps on the support page without connecting to my cable provider (how would that work? - seems unlikely to me). This request (actually "mandate") is onerous to me and I have not had time to get to it until tonight.... Well - I've tried and it's not remotely clear to me where these diagnostic steps are located on the web - I was told "enter the model # and they'll be right there"!! - but no. I certainly don't want to call Netgear to have it explained - my calls to them have usually involved holds of an hour or so followed by conversations with somewhat rude and pushy people who prioritize selling my something else (that I have zero interest in) rather than listening to me. If anyone at Netgear tries to track my original issue it may be difficult. I have been forced to change my log in email address for the simple reason that, when I requested a new password, the promised email never arrived (from Netgear). If anyone at Netgear thinks they can help (without forcing me to diagnose a piece of equipment that doesn't work) - then I'll be happy to provide the case ID. If Netgear cannot help, I feel a very strong consumer responsibility to make sure other potential customers understand that the equipment will likely fail and subsequent "support" will be frustrating and potentially more expensive that the item they purchased!! If anyone else has good advice - please chip in! I know I'm not alone with this device (ref matt_rupp's posting on 7/31/15) I wonder if this problem is so widespread with this unit that Netgear is playing hardball in an effort to avoid huge warranty costs - unfortunately you can't treat consumers like that these days. One positive comment - through all this the Netgear router has perforemd well (maybe this is Netgear's core strength - not modems)3.8KViews0likes1CommentAnyone have Netgear honor their warranty for failed product?
Second CMD31T cable modem that failed. Modem extremely hot. Smells like burning plastic. Cannot get any customer support to honor warranty. Just get run around say they will call me back to authorize return and I never get a call back. First model failed after 3 months (never got warranty on first one...) second failed after 8 months. Have spent hours on hold or talking to customer service with no luck. Several unsuccessful run around calls made. Any suggestions for getting warranty honored? Maybe contacting state consumer protection office or Michigan Attorney General to look into compaint? Anyone else have any luck with warranty returns with Netgear?4.8KViews0likes2Comments