NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
RN204 issues with 1 disk
Hi All, My RN204 has been workign perfectly for well over 5 years so I was long overdue a problem ha ha A little extra info:- Disk 1 - 2TB Disk 2 - 2TB Disk 3 - 3TB Disk 4 - 2TB All in X RAID (RAID 5) around 2.5TB free space left, 23GB of snapshots After I upgraded the firmware to 6.2.5 latest the other day (coincidence I think) I started to get a lot of AAT errors on Disk 3. I removed the disk and tried to put a 1TB in its place but it came up with the flashing data degraded and kept doing so and did not even try and add the new 1TB disk into the pool. I put the original 3TB disk back in, and it started to recover data (albeit very slowly) 5% in 24 hours. So my question is, once it has recoved all data, should I be able to just add a 2TB drive (looking at the free space above of 2.5TB) I should have around 500GB of spare space? Thank you in advance for any help
