NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.

RNDU2000

3 Topics

RNDU2000 Power Supply Issue
I own an out of warranty RNDU2000 that has been experiencing 'V+12 power is out of normal range' issues, and the pwer supply is starting to fail. I notice that at the back of the unit is an unknown port marked "P" that has five male pins in parallel that I assume is for an external power supply. If this is for an external power supply, what sort of connector is that? Can someone recommend a replacement external power supply? Or perhaps a source for a replacement chassis. I do not wnat to upgrade to a new unit, as I am quite attached to the stability of the older OS
jeffyd
Oct 23, 2017 Place Use your ReadyNAS
1.3KViews
0likes
6Comments
Problem umount volume after one disk failure on RNDU2000 #27445297
Hello Netgear Community!!! First, I apologize for my english (I'm french). I've got a problem on my ReadyNAS Ultra 2 (2 * 2 terabyte) sync on X-RAID to mirroring my datas between my 2 HDD. A few days ago, one HDD has failed. Later, unable to connect to nas shares. I immediatly look at the logs and I see : "The paths for the shares listed below could not be found. Typically, this occurs when the readyNAS is unable to access the data volume. .....<list of the shares>....". I then go in the volume management menu and I see an other pop-up error who accurate no volume is mounted. I decide to connect through SSH. When I list disk partitions (fdisk -l), I note that the partition that contains the datas is not present. I've tried to mount many partitions that I see into /dev without success. My questions are : - Is there someone who has had this problem or almost the same ? - How to solve it ? - Is it possible to read X-RAID disk on ubuntu system, GParted or other linux distribution ? I think it's a firmware problem when the nas mounting volumes, or a security of its system (X-RAID) that stop the mounting of volumes as the failed HDD has not be changed. My readynas contains 12 years of family pics, personal documents and working files, so I will be disappointed to have lost everything. Thank's a lot If you have the solution !!! By
cedreek
Sep 22, 2016 Place Use your ReadyNAS
3.4KViews
0likes
2Comments
ReadyNAS Ultra 2 Plus will not boot, corrupt firmware suspected but need help...
Hi, I read another posting "ReadyNAS Ultra 2 Plus can't find on Raidar/network" and I understand mdgm can help if you have corrupted boot wich I suspect. I did do some manual add of packages to the system and suddenly it did not boot. I have removed the disks and checked in PC with disktool and they are both ok. I have tried all OS reinstall, fatory reset and also USB restore with several USB-keys. Nothing works....need help. Thanks Daniel RNDU2000 FW: 4.2.28
dmgk
Aug 02, 2016 Place Use your ReadyNAS
3.8KViews
0likes
9Comments