NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
How to turn off the LED in the access point WAC505 and WAC510?
How to turn off the LED in the access point WAC505 and WAC510? I am using these access points in our hotel and the blinking LED lights are annoying if the access points are installed in the hotel rooms. The manual of WAC505 explains how to switch them off, claiming that there is an "LED Control" button on the dashboard. Unfortunately, when I open my web browser, log into the dashboard of the access point and then look for Management > Configuration > System > Advanced > LED Control there is no LED Control. Any help is very much appreciated.WAC-505 nearby devices (Notebooks purchased new this year) are losing internet access.
I was checking the connection logs and noticed despite being set to use both 2.4 & 5Ghz all devices connect to this AP only on 2.4 Ghz, two of them are less than 2 metres away from the AP. There are numerous other AP's on the network and their connection history is more a mix of both 2.4 & 5 Ghz as expected. I have tried rebooting the AP (same behavior after reboot), and it gets regular firmware updates automatically.