NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.

firmware 6.5.1

2 Topics

Since June 18 cannot map NAS as network drive to Windows 10
I have two Netgear 4 disk RN104s with firmware 6.5.1 (upgraded this monring from 6.5) along with Windows 10 home edition build 10586.420 and up until this last weekend (18 June 2016) I was able to access the NAS by mapping them as a network drive or as netwrok locations. Since June 18 I cannot access the NAS via a mapped drive or via a network location. I used recovery to earlier Windows updates and spend 3 hours with Microsoft chat at no avail. I can get to teh NAS drives via ip (https://192.168.1.XX/admin/) and login. I have also applied this patch from Netgear, but that has not worked either. Also looking into Netgear SMB solution, but not sure how to proceed as the solution is vague. Any help would be appreciated. DM
Solved
motamedd
Aug 21, 2016 Place Use your ReadyNAS
12KViews
1like
17Comments
ReadyNAS RN202 activity light flashing 30 minutes after boot up
Firmware 6.5.1, RN202 At each boot of my RN202 NAS Box (RAID 1 2TB disks with 400GB of data on), the blue activity light flashes for 30 minutes and i can hear the disks being accessed. I have bit rot switched on all shares. I can still access all my data in this time. is the system doing an automatic file scrub, everytime on boot? If so how do i do find out? I cant see anything in the logs
Fozzie100
Jul 25, 2016 Place Use your ReadyNAS
3.1KViews
0likes
3Comments