NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Tagsmr650034 TopicsMR110027 Topicsmr615026 TopicsAntenna21 Topicsac79711 Topicsmr210010 Topicsmr61104 Topics
DiscussionsMost RecentNewest TopicsNo Replies YetSolutionsNighthawk MR1100-1TLAUS Firmware Upgrade Good afternoon , I just did a factory reset on my Nighthawk MR1100-1TLAUS. I am trying to upgrade the firmware to the lastest version ( MR1100-1TLAUS_23113199_NTG9x50C_12.06.02.00_00_TELSTRA_04.04...MR 7450 is not detectable in mobile app.. Hello! Recently purchased an Nighthawk MR7450 mobile router and am experiencing the following issue: it can't detect in Netgear Mobile app. It's connected via Wi-Fi and web access is fine. I also hav...M6 and IP-passthrough with routable static IP I have an M6 Pro (MR6550) and a T-Mobile business internet account, and I'm unable to use the M6 in passthrough mode. The M6 (the hotspot) does some pretty inexplicable things. Like ARP my firew...Which LTE/5g modems/routers supports flawless bridge mode/passthrough I live in a location with no decent cabled internet, so I am looking at a 4g/5g solution as this should give me a decent speed over my cabled alternatives But I need an unfiltered, 100% bridge/passt...Nighthawk M3 – Cannot change SSID for 2.4 GHz / 5 GHz without factory reset Hi, I have an issue with my Netgear Nighthawk M3. I can only change the SSID for the 2.4 GHz and 5 GHz bands immediately after a factory reset. After normal setup, the “Apply” button stays red in t...Unable to save changes to WIFI Network Name on Nighthawk M3 MH3150 I can't save any WiFi changes on my new Nighthawk M3. I have followed the instructions in the manual, but the Apply button is disabled. I've tried on my phone and on a laptop and get the same problem...SolvedUsing LM1200 standalone as the internet provider I have recently bought an LM1200 to connect to a smart cooler. It fits my bill because I can use a SIM card as an internet source and ethernet to connect to the machine. I'm testing it in my Mac ...SolvedM7 Pro (MR7400)... Bridge Mode/IP-Passthrough Only Works After Reboot? As the topic says... If I reboot the router to which the M7 is attached via eth, then I have to reboot the M7 as well before bridge mode works. Has anyone else experienced this, or the contrary;...Nighthawk M2 IP PassThrough stops working when idle So I have a Nighthawk M2 in IP PassThrough with a VPN tunnel uplink over time it disconnects from 4G network for some reason and as soon as I login to the Nighthawk it springs to life. firmware NTG2...AirCard 785s stuck in boot loop Yesterday i connected my 785s to ac power without a battery it was working fine during the day but when i was sleeping it went into some boot loop. It resets itself 6 times and then starts flashing b...
