NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Tagsmr650034 TopicsMR110027 Topicsmr615026 TopicsAntenna21 Topicsac79711 Topicsmr210010 Topicsmr61104 Topics
DiscussionsMost RecentNewest TopicsNo Replies YetSolutionsUsing LM1200 standalone as the internet provider I have recently bought an LM1200 to connect to a smart cooler. It fits my bill because I can use a SIM card as an internet source and ethernet to connect to the machine. I'm testing it in my Mac ...SolvedMR5200 broke down Last week at once the battery in my NightHawk M5 said puffff. The screen of my Nighthawk was black..... and no connection no more. After it cooled down I was not able to close the back of the Nightha...SolvedMR7450 I have purchased a Netgear MR7450 mobile router, it's working as it should. However, the problem I have with it, within the Advanced option Data Usage is that it's NOT showing the number of (0 Day's ...SolvedCarrier aggregation info on MR6150? Does M6 5g support carrier aggregation? I guess it is. If so, how many carrier aggregation bands can I use? For example, the Nokia 5G Receiver 5G16-A supports 4 Carrier Aggregation (4CA), allowing it...SolvedM7 Ultra Pro - external antenna With the M7 Ultra diesel the modem transmit wifi signal from the external antenna or just receive signal. I have a M7 in a locked container and would like to receive 5g signal and transmit a wifi sig...SolvedChange the name of the network and the password for the network go back to factory settings? After resetting my Aircard 785 to factory settings, the name of the network has changed on the Aircard hotspot display, for example to ntgrxyz100. The password for the network (I don't mean the p...SolvedHow to Change password of aircard 785 How can I change the default password for my aircard 785 hotspot? SolvedMR1100-100 M1 Do not boot anymore Hi all, My M1 is no longer under warranty and does not boot anymore (with or without battery, with or without SIM). It seems to be a hardware issue. If I press firmly on the screen with constant ...SolvedLB1120 pfSense Bridge Mode - no DHCP I'm using the LB1120 to provide WAN access through my pfSense router. I am looking to pass through the WAN IP via bridge mode to the pfSense router. It's configured to get a DHCP address but ...SolvedUnable to save changes to WIFI Network Name on Nighthawk M3 MH3150 I can't save any WiFi changes on my new Nighthawk M3. I have followed the instructions in the manual, but the Apply button is disabled. I've tried on my phone and on a laptop and get the same problem...Solved
