NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
harryballzanya
Nov 25, 2017Tutor
Can't get wireless speeds over 200mbps on RBK40
Hi everyone. I have an RBK40 system with 1x satellite. I recently upgraded to a 400/40 plan with my ISP (previous was 200/20). Speeds from router to modem are maxing at plan speeds -- no issues! Speeds are even perfect with hardwired NAS and PC. Again, no issues.
The problem I'm having is via wireless. None of my wireless N devices will exceed more than just a little over 200mbps down (upload speeds are fine). Should I expect to get more than 200mbps down? I've tested on iPhone 7s, iPads, and laptops.
Here's the configuration I have for both the router and the satellite. I'm also running latest firmware (V2.0.0.58):
Orbi Satellite WiFi Status (5GHz)
- Name (SSID): *****
- Channel: 36+40+44+48(P)
- Region: North America
- Mode: Up to 866.7 Mbps
- Wireless AP: On
- Broadcast Name: On
- Security Type: WPA2-PSK[AES]
Orbi Satellite WiFi Status (2.4GHz)
- Name (SSID): *****
- Channel: 9
- Region: North America
- Mode: Up to 400 Mbps
- Wireless AP: On
- Broadcast Name: On
- Security Type: WPA2-PSK[AES]
3 Replies
Sort By
- Bump
- st_shawMaster
Not sure if you really meant it, but you said wireless N. Most N devices are limited to a link rate of 450 Mbps. The most you will get is 50% to 60% of the link rate as throughput, so 200 Mbps would be about right.
With my iPhone 7+, an 802.11ac device, and an Orbi RBR50 I can get ~470 Mbps throughput if I'm a few feet from the router.
In any case, if you are getting 200 Mbps on your mobile devices via WiFi then I don't think you have any serious issues to worry about.
Thanks for the reply! I meant to say 5G...not wireless N. Completely different -- sorry for the confusion!
I can't get more than 200mbps on my iPhone even if I'm right next to the router and/or satellite. I'm not overly concerned, but if I can/should be getting faster speeds I'd like to know how I can/why it's not working.