NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Connected Devices displaying differently since update to V1.3.0.12
Before I updated to the new V1.3.0.12 firmware, under "Attached Devices", it would show which devices were connected to the router and which were connected to the satellite. Now, after the update to...
Something you can try until it's fixed upstream (advanced users only!):
- Go to the debug page and enable telnet
- Telnet into the router
- Execute the following:
nvram set enable_adv_attached=1 nvram commit
- Exit telnet
- Go to the debug page and disable telnet (please don't forget this step!)
Rodney
hi
go to
orbilogin.com/debug.htm
tick
Enable advanced view of Attached Devices page
and click save down the botton of the page
close the window and go back to the attached devices list and you will see the better attached devices list
pete
This is now happening again with firmware v1.3.0.26.
Can no longer see whether or not a device is attached to the router or satellite on the 'Attached Devices' page, and I do not see a 'Enable advanced view...' on the debug page.
This was super useful.
you can see whats attached to the sats by accessing there web pages from their ip addresses , however you cant tell if they are connected to 2.4 or 5 gig at this stage