NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Connected Devices displaying differently since update to V1.3.0.12
Before I updated to the new V1.3.0.12 firmware, under "Attached Devices", it would show which devices were connected to the router and which were connected to the satellite. Now, after the update to...
Something you can try until it's fixed upstream (advanced users only!):
- Go to the debug page and enable telnet
- Telnet into the router
- Execute the following:
nvram set enable_adv_attached=1 nvram commit
- Exit telnet
- Go to the debug page and disable telnet (please don't forget this step!)
Rodney
Okay, but not nearly as convenient as before. Little baffling that a super useful feature was removed. đ
XBond wrote:
. Little baffling that a super useful feature was removed. đcertainly not disagreeing with you there :smileyfrustrated:
Something you can try until it's fixed upstream (advanced users only!):
- Go to the debug page and enable telnet
- Telnet into the router
- Execute the following:
nvram set enable_adv_attached=1 nvram commit
- Exit telnet
- Go to the debug page and disable telnet (please don't forget this step!)
Rodney
also worked for me on 1.4.0.34
