NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Ethernet Backhaul Best Practices
Two questions/clarifications (1) RBR50 is in AP mode. The RBR50 is connected to the ISP router using the RBR50's yellow WAN port. Going to try ethernet backhaul but wanted to do my homework first....
- A large switch with other devices is fine. I would just try the different combinations until you are happy. I concluded it was working fine only when the satellite showed up in the satellites list and said it was using a wired connection, even after a reboot.
I have similar setup, with Orbi in AP mode and connected to ISP router via WAN port, and a switch connected to the ISP router and Orbi Satellite to the switch for backhaul is this setup incorrect?
I and others found it will not communicate with the satellite when using Ethernet backhaul when connected like that. Do you see the satellite listed in the satellite section on the devices webpage?
MikeMcr yes I do see it but interestingly whenever I have a power outage or Orbi randomly reboots, the sattalite disappears from the attached list on the Main unit and I have to unplug the Ethernet cable and resync wirelessly and once it is synced I plug the Ethernet cable back and it shows up...it is a pain and now I wonder if this is because what you described.