Firmware Version 1.10.1.2

---

@BobertSaget wrote:
st_shaw, thanks for posting the image. Something seems wonky with your software though. If you look at the MAC address, they don't correlate with the type of signal going out and your annotations. The two that start with A6 are your satellite. I don't know why it says it's putting out two 2.4 GHz signals but that's not right.

Did the other Wi-Fi scanners you tried and show the same thing?

---

I double checked by powering off the satellite.  The router is broadcasting using one MAC address starting with A0 and one starting with A6.  So it looks like the labels are correct. The A6s are the 2.4G band. The A0s are the 5G band.

I've used WiFi Explorer, Netspot, WiFi Scanner, and AirRadar.  All behave the same. None will show the backhaul regularly.  It will usually show briefly if I power-cycle the WiFi. It's as if Orbi broadcasts the hidden networks only when a new device is connecting to the network, then goes dark.

Hi,

originally, 1.11.02, but now i'm on, 1.11.0.8

Bullet

So, overnight, we're still getting some Nest connection drops, but my ipad battery drain seems better, I've not used it much to really tell, but it definitely seems like progress.

My Sky Q issues (in terms of terrible and dropped Wifi connections across the system and across the internet) are resovled and it's now performing as it has done this last year.  

Overall, it's definitely looking like a good step forwards

Bullet