NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
R8000 to ORBI RBR40
Have R8000 for personal activities with rbr40 connected. ORBI drooping signal and will not synch with satellite.
6 Replies
What FW is currently loaded?
What is the Mfr and model# of the ISP modem the NG router is connected too?
Is the R8000 wifi disabled? I presume the Orbi is running in AP mode?
What is the size of your home? Sq Ft?
What is the distance between the router and satellite(s)? 30 feet is recommended in between them to begin with depending upon building materials.
What channels are you using? Auto? Try setting manual channel 1, 6 or 11 on 2.4Ghz and any unused channel on 5Ghz.
Any Wifi Neighbors near by? If so, how many?
Try disabling the following and see:
MIMO, Daisy Chain, Fast Roaming, IPv6. Save settings and reboot the router and satellite(s).What is FW?
Modem is Arris SB8200 (owned).
Yes. R8000 wifi disabled. Don't know if the Orbi is running in AP (?) mode. How do I find out?
House is approx 1800 sq ft.
Satellite is approx 25 ft from Orbi.
Not tech savy regarding channels. How do I find out? Are you referring to the Orbi or Nighthawk?
One wifi neighbor within 50 yards.
How do I disable any of the things you are referring to? Are you referring to the Orbi or Nighthawk?
I do know how to save and reboot.
Thanks.
What is FW?
Orbi is now running in AP mode.
Not tech savy regarding channels. How do I find out? Are you referring to the Orbi or Nighthawk?
Disabled all of the things you referred to.
I
