I am having issues with my dc113a. I purchased the DC113a a couple of weeks ago to use with my Netgear AC791l. When I put the hotspot in the cradle, the hotspot will charge; however, the ethernet port is not working properly. Only the amber light on the ethernet port on the back of the DC113a is blinking and the speed coming from the ethernet port is SLOW. What am I doing wrong?

Well, DarrenM, that's quite a convenient change in the compatibility statement to make several months after Netgear discontinued the DC113A. While the DC113A was still readily available, both Netgear.Com and Verizon Wireless' own website listed the DC113A as a fully-compatible accessory for the AC791L. So, what you're now stating is that, in effect, Netgear LIED TO US about the compatibility of the DC113A? :smileyfrustrated:The problem here isn't the DC113A Cradle. It was designed to be fully compatible with ALL North American and European Netgear Air Card models available at the time of its release, and all FUTURE models that would come out after it was released, which includes the AC791L. The problem here is the FAULTY FIRMWARE FOR THE AC791L which still hasn't been updated since release, because Verizon Wireless is delaying the Firmware Update with their unnecessarily long Carrier Certification Process. It should NOT take months or in some cases YEARS after the Firmware Update is sent to VZW for that Update to be released to the End Users of the Air Cards. The fact that it does is totally Verizon's fault, and is something that Netgear SHOULD be working with VZW to resolve. :smileymad:EDIT: DarrenM, it also states quite clearly on THIS NETGEAR PRODUCT COMPATIBILITY PAGE that the DC113A is compatible with "NETGEAR AirCard 79xS Products". The Verizon Wireless Jetpack AC791L is part of that "79xS" series of Air Cards. So, you didn't even direct us to the correct Product Compatibility Page. *Shaking My Head*

Hello uga_fan13 Have you checked the Internet setup page under Internet source there are options that only allow the cradle to charge or set different ways the cradle uses the Aircard it could be on the wrong setting. DarrenM

I've had a similar issue. With mine, the ethernet port is very unreliable, sometimes it works, sometimes it doesn't. And sometimes, it will work for a little while, then suddenly stop working, causing the connected device (either my laptop, or my Xbox 360) to lose its internet connection. I've even put in a warranty claim on the Signal Boosting Cradle and had it swapped out by Netgear under warranty for that specific issue. Sadly, it didn't resolve the issue for me. :smileysad:It appears that there is a serious bug in the firmware regarding use of this hotspot in a tethered mode, via the USB port, which is also what enables the ethernet port on the Signal Boosting Cradle. Sometimes the AC791L will correctly enter USB tethering when connected to the Cradle, and sometimes it won't. With the Firmware Update still several months away (see my topic on that issue) there doesn't seem to be any solution right now except to switch to a different device. But not everyone can afford to do that. :smileyindifferent:

DarrenM or anyone else from Netgear, why haven't you replied back to this topic? The inability to use the Ethernet Port on the DC113A is a MAJOR problem that needs to be resolved! :smileymad:

Hello Jack_T_Chance It could be a compatibility issue as the Dc113a does not fully support the AC791L here is the list of compatible devices. https://kb.netgear.com/app/answers/detail/a_id/26864 DarrenM

AC791l and DC113a. I cannot get the cradle ethernet port to work

7 Replies

DarrenM
Sr. NETGEAR Moderator
Feb 08, 2016
Hello uga_fan13

Have you checked the Internet setup page under Internet source there are options that only allow the cradle to charge or set different ways the cradle uses the Aircard it could be on the wrong setting.

DarrenM
- Jack_T_Chance
  Guide
  May 09, 2016
  DarrenM or anyone else from Netgear, why haven't you replied back to this topic? The inability to use the Ethernet Port on the DC113A is a MAJOR problem that needs to be resolved! :smileymad:
  - DarrenM
    Sr. NETGEAR Moderator
    May 09, 2016
    Hello Jack_T_Chance
    
    It could be a compatibility issue as the Dc113a does not fully support the AC791L here is the list of compatible devices.
    
    https://kb.netgear.com/app/answers/detail/a_id/26864
    
    DarrenM
Jack_T_Chance
Guide
Feb 25, 2016
I've had a similar issue. With mine, the ethernet port is very unreliable, sometimes it works, sometimes it doesn't. And sometimes, it will work for a little while, then suddenly stop working, causing the connected device (either my laptop, or my Xbox 360) to lose its internet connection. I've even put in a warranty claim on the Signal Boosting Cradle and had it swapped out by Netgear under warranty for that specific issue. Sadly, it didn't resolve the issue for me. :smileysad:

It appears that there is a serious bug in the firmware regarding use of this hotspot in a tethered mode, via the USB port, which is also what enables the ethernet port on the Signal Boosting Cradle. Sometimes the AC791L will correctly enter USB tethering when connected to the Cradle, and sometimes it won't. With the Firmware Update still several months away (see my topic on that issue) there doesn't seem to be any solution right now except to switch to a different device. But not everyone can afford to do that. :smileyindifferent:
antennamatt
Aspirant
Mar 09, 2017
Purchase the Micro to Ethernet adapter:

Plugable USB 2.0 OTG Micro-B to 10/100 Fast Ethernet Adapter for Windows Tablets & Raspberry Pi Zero (ASIX AX88772A chipset) https://www.amazon.com/dp/B00RM3KXAU/ref=cm_sw_r_cp_apip_LsB1XR9OgwTDx
- JoeBenya
  Aspirant
  Aug 17, 2017
  There is a problem with this solution as an alternative to the cradle - the adapter does not charge the AC791L battery (unlike the cradle). So it cannot act as a permanent ethernet port out. It must be removed for recharging daily. So, great solution for road warrior, but not one looking for a permanent hotspot to ethernet connection for home use (such as in a rural internet setup).

Forum Discussion

AC791l and DC113a. I cannot get the cradle ethernet port to work