NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
4350 multiple routers for a/v
I have a video over ip system (transmit receiver bluestream to send hdmi to monitors on a network) 4x 4350 switches with sfp modules to link is 'stacking' how i need to configure this? They will ...
Hi Jeffhtg
I would temper adithya11 response a bit (big thanks to him/her though) - and go simpler:
Please use the step by step application notes here: https://www.netgear.com/hub/business/av/av-tech-guides/
When onboarding your AV Line switches (M4350) in Engage, firmware will be updated. Please use approved 10G or 25G modules, and no - stacking is absolutely not advised. Please keep the switches standalone in Engage (www.netgear.com/engage), with enough bandwidth for the video streams. The only configuration you need to do is under Site Settings, edit the default VLAN 1, and apply the Video+Audio AES67 profile. Apply until the end, and Save on the upper right.
NETGEAR AV is certified at Bluestream, and we have a dedicated Bluestream profile coming in the next weeks - but for now you will be perfectly covered with the Video+AES67 Audio generic profile, if you follow the app notes above!
You can get back to us for any support, sending an email to ProAVDesign@netgear.com
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
