NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Auto VoIP on gsm7352sv2
Hello I've got some questions regarding auto voip on our switches. Product Name : GSM7352Sv2 48-Port Gigabit Layer 3 Stackable Managed Switch with 2 10G SFP+ port, 10.0.0.53, 01.00.35 The d...
Hi robfantini,
Welcome to the community!
As your switch model is M5300-52G3(GSM7352Sv2h2) with firmware is v10.0.0.53. I suggest you reference to CLI User Manual of below link (Page508: Auto VoIP). It is admin guide for software Version 10.x.
For more detailed information about M5300-53G3 switch, please reference to link.
Hope it helps!
Regards,
EricZ
NETGEAR employee
Note this is at end of that last post: 'Model: M5300-52G3 (GSM7352Sv2h2)|ProSAFE '
it is not a 'h2' just 'GSM7352Sv2' . I assume those are different models.
Hi robfantini,
Welcome to the community!
As your switch model is M5300-52G3(GSM7352Sv2h2) with firmware is v10.0.0.53. I suggest you reference to CLI User Manual of below link (Page508: Auto VoIP). It is admin guide for software Version 10.x.
For more detailed information about M5300-53G3 switch, please reference to link.
Hope it helps!
Regards,
EricZ
NETGEAR employee
thank you that does help.
- I'll open a new thread and may need to fill a bug report for this: I started out using oui based auto-voip. when I changes to protocol based the stack frooze. after restart only on of the 2 switches in the stack had link lites lit on the 20 interfaces in used. beware of changing auto-voip modes.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
