NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Auto VoIP on gsm7352sv2
Hello I've got some questions regarding auto voip on our switches. Product Name : GSM7352Sv2 48-Port Gigabit Layer 3 Stackable Managed Switch with 2 10G SFP+ port, 10.0.0.53, 01.00.35 The d...
Hi robfantini,
Welcome to the community!
As your switch model is M5300-52G3(GSM7352Sv2h2) with firmware is v10.0.0.53. I suggest you reference to CLI User Manual of below link (Page508: Auto VoIP). It is admin guide for software Version 10.x.
For more detailed information about M5300-53G3 switch, please reference to link.
Hope it helps!
Regards,
EricZ
NETGEAR employee
Hi robfantini,
Welcome to the community!
As your switch model is M5300-52G3(GSM7352Sv2h2) with firmware is v10.0.0.53. I suggest you reference to CLI User Manual of below link (Page508: Auto VoIP). It is admin guide for software Version 10.x.
For more detailed information about M5300-53G3 switch, please reference to link.
Hope it helps!
Regards,
EricZ
NETGEAR employee
thank you that does help.
- I'll open a new thread and may need to fill a bug report for this: I started out using oui based auto-voip. when I changes to protocol based the stack frooze. after restart only on of the 2 switches in the stack had link lites lit on the 20 interfaces in used. beware of changing auto-voip modes.
Hi robfantini,
It's a pleasure to help you!
Ok, for your new question, does it mean the stack member will freezing when changing auto-voip mode from OUI-based to Protocol-based?
Is the unit not working? All ports is down? Could you please provide more detailed information?
Actually, the Switch support enable OUI-based and Protocol-based in Auto-VoIP configure page at the same time, no need change the mode.
EricZ
Netgear Employee
Hi robfantini,
I have found that you post the new question as below, and I will disscuss with you in that new case.
With regard to resolve your problem, I encourage you to mark the appropriate reply as the “Accepted Solution” so others can be confident in benefiting from the solution. The NETGEAR Community looks forward to hearing from you and being a helpful resource in the future!
Regards,
EricZ
NETGEAR Employee
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
