NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Connexion with PoE Cisco
I have a problem to feed cisco access points (AIR-AP1131G-E-K9) with switch M4100-26G-PoE.
error message :
WARNING ALL RADIOS DISABLED
LOW_POWER_CLASSIC_NO_INJECTOR_CONFIGURED (M4100-26G-POE on port xxxx.xxxx.xxxx)
From old wally brain the Cisco AP have some power injector status settings in the advanced section. Whatever was in the heads of the designers, if it is set to "Installed" the MAC of the PoE upstream switch is retained, and needs to be re-learned once moved to another switch. Nasty WAC admins might have set it to "Foreign", so it's also locked to a specific PoE upstream switch, too. Only "Override" will make it behave like a more common standard PoE device, always receiving power - and allowing to bring up the radios.
Not a Netgear PoE switch issue at all...
1 Reply
From old wally brain the Cisco AP have some power injector status settings in the advanced section. Whatever was in the heads of the designers, if it is set to "Installed" the MAC of the PoE upstream switch is retained, and needs to be re-learned once moved to another switch. Nasty WAC admins might have set it to "Foreign", so it's also locked to a specific PoE upstream switch, too. Only "Override" will make it behave like a more common standard PoE device, always receiving power - and allowing to bring up the radios.
Not a Netgear PoE switch issue at all...
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
