NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
GS110EMX uplink to XS505M only 5gbit
Hello everybody! đ Model: GS110EMX, Firmware: 1.0.2.7 My problem: If I connect my 10G TB3 ethernet adapter (on the 2nd floor of our house) to the unmanaged X505M (in the basement, approx 20m ...
millhaus wrote:
I tried to change the speed setting of the uplink port from Auto to 10G, but the web interface only offers options up to 100M Full Duplex (why is that? đ)
For copper link speeds starting from 1000Mb/s and up, auto negotiation is mandatory.
Quickly looped-in an XS505M in the uplink to an XS728T on the almost two decades old in-house installation (yes, all CAT6A modules on some qualified 980 MHz cabling) - about 35 meters including patch cables - the XS505M does show two green LEDs on both ports. Here the GS110EMX with the port #10 looped through the XS505M on 2 meter patch cord:
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
