NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
GSM7224 VLAN and trunking with Cisco
Hi, We've just bought a GSM7224v2 and we're trying to get it work with our Cisco 2960 but to no avail. The Cisco has 3 VLAN configured and we would like to be able to use these VLANs on the GSM...
dwchan69,
With the trunk port, you will want to set VLANs 10, 20, and 200 as tagged.
I would then set VLAN 1 as untagged on the Netgear, and set the PVID as VLAN 1 for the trunk port. This is like setting "switchport trunk native vlan 1" on a Cisco switch. It means that everything that you haven't specifically tagged will be sent on VLAN 1, and therefore not used.
With the trunk port, you will want to set VLANs 10, 20, and 200 as tagged.
I would then set VLAN 1 as untagged on the Netgear, and set the PVID as VLAN 1 for the trunk port. This is like setting "switchport trunk native vlan 1" on a Cisco switch. It means that everything that you haven't specifically tagged will be sent on VLAN 1, and therefore not used.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
