M4300 how to delete VLAN from inluce list

Hello,

ok, i can use "vlan participation exclude <vlan-id>"

This removes the VLAN from the include-list and put it to the exclude-list.

Over time this fills then the exclude-list....

(I dont want to delete the VLAN, only change the config of this trunk interface.)

interface 1/0/30
ip dhcp snooping log-invalid
vlan pvid 1010
vlan ingressfilter
vlan participation exclude 1
vlan participation include 1010,1020
exit

(Access-A07)(Config)#interface 1/0/30

(Access-A07)(Interface 1/0/30)#vlan participation exclude 1020

(Access-A07)(Interface 1/0/30)#exit

(Access-A07)(Config)#do show running-config interface 1/0/30

interface 1/0/30
ip dhcp snooping log-invalid
vlan pvid 1010
vlan ingressfilter
vlan participation exclude 1,1020
vlan participation include 1010
exit

It seems to me that using cisco-like commands like "switchport mode trunk" and "switchport trunk allowed vlan x,y,z" are prefered now over general mode.

If configure an interface as a trunk in general mode with

"vlan participation 10,20,30,40"

"vlan pvid 10"

"vlan tagging 20,30,40"

it is not shown as a trunk in the Web-GUI.

When trunk is selected in the Web-GUI "switchport mode"- and "switchport trunk allowed vlan"-commands are inserted in the config.

Are these commands preferd now?

regards

Jörg

M4350-48G4XF with FW 14.0.2.26 (and older... 14.0.18...)