NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Prosafe M4300 shows "> symbol for all IP addresses and route "disabled"
Hello, I have ran into an interesting behavior that i have not seen in the past. I have been remotely connected to an M4300 Netgear switch through the service port and configured it for 4 total v...
Hello JohnC_V ,
The current firmware of the switch is running is 12.0.6.7. I will attempt to upgrade the switch later on today and will follow up from there. Thank you for the insight.
Attached is a screenshot of the phone icon that appears in the main screen
Welcome to our community! :)
Thanks for the attachment. It seems that these symbols might actually be an error from the firmware itself. May I know if the switch is running on the latest firmware? If not, please do upgrade the firmware to its latest version and we will see it from there.
Another thing is that you can only access the GUI of the switch if you are on the same VLAN of the management interface unless you enabled routing to VLAN 1.
Regards,
John
NETGEAR Community Team
Hello JohnC_V ,
The current firmware of the switch is running is 12.0.6.7. I will attempt to upgrade the switch later on today and will follow up from there. Thank you for the insight.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
